Coloring with Pencils

Hello, hope you are all continuing to have a great summer and enjoying the heat! In this post I am going to attempt to share with you my method for coloring with colored pencils. It may turn out to be a long post, so I’m going to jump right into it. Below is a pic of materials you will need to get started.

  • Colored Pencils
  • Blending Stumps (rolled paper pencils)
  • Images stamped on smooth white cardstock ( I used memento black tux ink)
  • Gamsol blending solution (Hobby Lobby or Michaels)
  • small jar with cotton balls
  • Sandpaper paddle
  • Pencil sharpener

20180629_111944.jpg   20180629_111958.jpg

  1. Soak your cotton balls with some gamsol and store them in the container. The gamsol will evaporate, so I like to keep them covered when I’m not wetting a blending stump.
  2. Lay down color on your image
  3. Wet a blending stump by pressing it into your gamsol soaked cotton balls.
  4. Run the tip of the stump in a small circular motion on the color, slowly blending it out.
  5. Use the stumps over and over on the same colors, ( I have a red stump, blue stump, green stump, etc) or you can use the sandpaper paddle to sand the stump each time you switch colors.
  6. The pencil sharpener is just for your pencils, you’ll find this method wears the pencils down pretty quickly.

The pencils you work with do make a difference. I like the prismacolors the best. I’ve also used the pregresso no-wood pencils and the dual-tipped Chameleon pencils. I’m sure others would work as well. The more wax content in the color the better.

20180629_113648 (1).jpg

Lay down your color & Blend it out:

To begin, lay down the color. Most stamps you can follow the outline or lines provided. Below are a few pictures to help explain what I mean. The leaves on the right, I put my color around the edges, when I blend this, the lightest area will be in the middle of my leaf. The leaves on the left, I concentrated the heaviest color towards the bottom of the leaf. When blended, the lightest area will be at the tip. Hopefully you can see the difference in the blended leaves.

20180629_112248 (1).jpg   20180629_112306 (1).jpg    20180629_112813 (1).jpg

Now, lets add a twist. One of the reasons I like this method so much, is because it is easy to blend multiple colors. Notice on the next set of leaves I’m laying down pine green on the bottom of the leaves with Kelly green in the mid section. Notice the look I accomplish with this technique! It’s so fun and easy! For the next set, I’m going to stay with my two-tone colors, but this time add the pine green on the outside edges and the Kelly green down the middle spine of the leaves. Blend it out and wow, an all together new look! As you can see, the possibilities are endless.

20180629_112526.jpg  20180629_112708.jpg 20180629_112731.jpg

So now that you get the idea lets move on and try flowers. As you can see, I add the darkest color where I think the darkest shading would be on my image and add a lighter tone where I think the light would hit. I will blend it so the tip of the flower is the lightest. On the second  flower, I felt it needed more warmth so I added some orange as a buffer between the red and pink. Blend it and see. I like it, I did the third flower the same way. Next I added yellow and blended it out for the centers of each flower.

20180629_113219.jpg  20180629_113411.jpg

20180629_113822.jpg  20180629_113908.jpg

Lets move on to some more complicated images. Below I’ve added color to a cute raccoon waving from a stump. For the brown, I traced the lines in the image, this is usually the easiest way to go. Because I wanted my raccoon gray, I laid down more color on the outside lines of the image, but I also lightly colored him in. Sometimes lighter colors are harder to blend than dark colors. I find gray does better if its lightly colored in all over, then blended out.

20180629_114137.jpg  20180629_114447.jpg

On this large raccoon you can see the difference between where I’ve just colored (his face and legs), and where I colored and blended with gamsol (his arms). I love the smooth look the gamsol makes.

20180629_121217 (1).jpg

For the last image, I’m going to use this new mermaid stamp. I’ll follow the three easy steps for each part of her. Lay down darkest color where I feel it should be shadowed, lay down lighter color on the edges, and blend it out. I think she looks great!

20180629_114845.jpg  20180629_115532.jpg  20180629_115712.jpg

The more you practice this method, the easier and better you will get at it. Give it a try and let me know how it turns out. I have a feeling you’re going to enjoy it as much as I do.

(All the images in this post are from Stamps of Life stamp sets)

20180629_115807.jpg

 

Winking Frogs- A Heartfelt Collection

Hello everyone. The month of May was filled with travel.We spent time in Indiana, Arizona, and France. I loved every minute but it is great to be back. Now that I am home, laundry is done and food is back in the kitchen, I can get back to my first love, paper-crafting!

In and around the many trips in the car and to airports, I eked out some time to make a few Winking Frog cards from the Heartfelt Creation Winking Frog Collection. Thankfully  I had a whole container of pieces from the collection already colored, die cut, and ready to go. So it was easy to sit down and put together some fun cards. I chose a selection of dies and stamps to accompany my sweet frogs and got to work.

 Step 1: Color my flowers to match my papers.
Similar to my previous post on Encouraging Cards, I did this with Color box Chalk ink and to get just the perfect color, I also used a ranger ink pad that I have. Unfortunately, these ink pads didn’t give me the color I was looking for, so I switched it up and used chalk ink that was much deeper in color than the pale ones in the pic above. The hot pink and plum ink pads gave just the color I wanted.
I  dabbed each flower petal with the lightest color first (avoiding the very center). Then I went around all the tips of the petals with the dark plum color. Lastly I used a fantastix stick with bright yellow chalk ink and colored the centers of each flower. I colored just a few leaves in case I needed them, shaped everything and glued them all together.

 

Step 2: Die Cut

I made 4 White Trellis Frame dies (Elizabeth Die), 4 white largest size eyelet circle (lawn fawn die), 4 pale green smaller circles and 4 swirled blue large circles (nested set from Michaels, not sure of the brand), and 4 large yellow scalloped circles (spellbinders). Then I cut a large oval (spellbinder die) from the front face of 4 white A7 card blanks with my patterned paper already adhere to the front to make my oval window card, I also used a med. scalloped circle (spellbinders) to make my shaped card. (There are many tutorial videos on line to see how this is done.)

Step 3: Stamp and Heat emboss my sentiments.

Most of the sentiments on these cards are from the HF Winking frog Collection, however the one on the oval window card is from a stamp set I bought at Michaels many moons ago. I think it is a Stampability, but I’m not positive.

Step 4: Create my Winking Frog Cards

I made 4 of each design. I will post each card individually on Pinterest if you want a better look.

 

(I did add two additional die cuts to the easel card from the Heartfelt Creation fancy borders set) The little frog with the leaf umbrella is attached with floss string so he is suspended in the oval. I also cut additional circle dies from pink and dark blue for my shaped card) All the other dies you can probably see where I used them.

So, I managed to make 20 cards after all this month. Coming soon are some cards inspired by the things I saw on my trip to France. I am also working on a post about coloring and blending, so please come back and check it out. Hope you are all having a great beginning to your summer.

In the meantime, Keep crafting!